Looking for:
Mercedes-benz comand system manual 2006.MERCEDES-BENZ M-Class 2006 W163 Comand Manual |
Mercedes-benz comand system manual 2006
Note: The online Owner's Manual is the latest version available. Deviations between this manual and items specific to your vehicle may occur since Mercedes-Benz constantly adapts its vehicles to the latest technology and modifies design and equipment. Please note that this online Owner's Manual does not under any circumstances replace the printed Owner's Manual which is supplied with the vehicle.
Batteries are required for the remote control and for the two sets of cordless headphones. Always keep batteries away from children.
If a battery is swallowed, seek immediate medical attention. Dispose of used batteries in an environmentally responsible manner. The remote control contains two type AAA, 1. To open the battery compartment: remove battery compartment cover on the back of the remote control. To do so, press down retaining lug and take off battery tray cover.
Remove discharged batteries from the tray. Insert the new batteries. Observe the polarity markings on the batteries and battery compartment when doing so. To close the battery compartment: insert battery compartment cover starting with retaining lugs into the battery compartment and allow catch tab to engage in place. The battery compartment cover is located on the left headphone.
The cordless headphones contain two type AAA, 1. To open the battery compartment: flip battery compartment cover upwards. As you do so, hold the left-hand side of the headphones as shown to prevent the batteries from falling out. To close the battery compartment: press battery compartment cover downwards until it engages into place. If the batteries have been inserted correctly, the indicator lamp will light up green when the headphones are switched on.
You will find information on the following topics in the "Cordless headphones" section more. You can use the vehicle loudspeakers to listen to a disc inserted in the rear-compartment drive. To do so, at least one of the rear-compartment screens must be set to disc mode. The sound from TV programmes played on the rear-compartment screens cannot be heard on the vehicle loudspeakers. To set operation via the main loudspeakers: press the function button on the centre console once or twice.
The headphones' volume setting does not affect the main loudspeakers. Switch on an audio operating mode e. Select Treble or Bass using the buttons on the remote control and press the button to confirm. Select a setting using the buttons and press the button to confirm. The two rear-compartment screens can be operated almost entirely independently from one another.
However, there can be a conflict in some menus if the two screens are used simultaneously. If the rear-compartment disc drive is being used for both screens simultaneously, selecting certain menus or settings on one of the screens also affects the other screen. When you exit an operating mode e. If you call up this operating mode again later, there are two possibilities:. In the first case, the operating mode appears as it is on the other screen.
In the second case, the setting appears on the screen as it was when you last exited the operating mode. Instructions for AUX mode are detailed later more. To show the menu: press the button on the remote control. Select Menu while the navigation menu more is shown and press the button to confirm. Select Brightness , Contrast , Colour or Auto using the buttons and press to confirm. The symbol in front of the Auto , optimised , or Widescreen menu item indicates the format currently set.
Select a format using the buttons and press the button to confirm. You can adjust almost all system settings individually for each screen without affecting the other screen. You make these settings using the remote control. Select System using the buttons on the remote control and press the button to confirm.
You see the system menu on the selected rear screen. Select System settings using the button and press the button to confirm. Select Language using the buttons and press the button to confirm.
The list of languages appears. The dot indicates the current setting. Select a language using the buttons and press the button to confirm. The Rear Seat Entertainment System activates the respective language. Select System settings in the system menu using the button on the remote control and press the button to confirm.
Select Day design , Night design or Automatic using the buttons and press the button to confirm. The icon indicates the current setting.
Day design. Night design. The display is set permanently to night design. The display design changes depending on the vehicle instrument cluster illumination. Select Brightness using the buttons and press the button to confirm. Adjust the brightness using the buttons and press the button to confirm. The brightness bar moves up or down.
The picture becomes lighter or darker in accordance with the scale. To hide the picture: select Display off in the system menu using the buttons on the remote control and press the button to confirm. To display the picture: press the button.
You must not open the casing. There is a risk of exposure to invisible laser radiation if the casing is opened, or if the casing is faulty or damaged. The Rear Seat Entertainment System contains no parts which you can repair yourself. For safety reasons, all maintenance work must be carried out by qualified aftersales technicians.
If there is already a disc inserted, this must be ejected before another is inserted. The printed side of the disc must face upwards. If neither side of the disc is printed, the side you wish to play must face downwards.
Data on an MP3 CD first needs to be loaded by the drive. Loading may take a some time, depending on the number of folders and tracks. Press the eject button. If you do not take the disc out of the slot, the drive will draw it in again automatically after a short while. The Rear Seat Entertainment System loads the inserted disc. Select Disc in the menu using the buttons on the remote control and press the button to confirm. The corresponding mode is switched on. The Rear Seat Entertainment System plays the disc.
Variable bit rates in MP3 tracks can result in the elapsed time shown being different to the actual elapsed time. To skip forwards or backwards to a track: press the or button on the remote control.
Press the or button. The skip forward function skips to the next track. Skipping backwards restarts the current track if it has been playing for more than eight seconds or starts the previous track if the current track has been playing for a shorter time.
If you have selected the Track list mix or Random folder playback options, the track order is random. In audio CD mode, the track list contains all tracks on the disc currently playing. In audio DVD mode, the track list contains all tracks in the currently active group; see "Setting the audio format" more.
In MP3 mode, the track list shows all tracks in the currently active folder as well as the folder structure, allowing you to select any track on the MP3 CD.
The track list appears. The dot indicates the current track. Select a track using the or button and press the button to confirm. Press the button on the remote control. Press the number key. Press the corresponding number buttons in rapid succession. It is not possible to enter numbers that exceed the number of tracks on the CD or in the currently active folder. Wait for approximately three seconds after making the entry. You will hear the track which has been entered.
The corresponding basic menu then reappears.
No comments:
Post a Comment